Sound report template
For film and video shoots. Updated 12 November 2026.
A sound report is the sheet the production sound mixer keeps for each sound roll: one line per file on the recorder, with the scene, take, file name, start timecode, which tracks carry what, and whether the take is circled. It goes to editorial with the sound files, with a copy to the script supervisor, the way the 2nd AC sends the camera report with the card, so the assistant editor can sync picture and sound and pick the right files. These three files are free to download, copy and change.
- Blank sound report, CSV (opens in Google Sheets, Excel or Numbers; 30 empty rows, names for up to 8 tracks)
- Blank sound report, printable PDF (one page, US Letter landscape, 25 rows, a 4-track key)
- Filled example, CSV (the same Low Tide morning as the camera report example: scenes 12 and 12A, room tone and a wild track)
Header: one per sound roll
Fill these once at the top of each report: production, date, shoot day, sheet number, mixer, boom operator, sound roll, recorder, sample rate and bit depth as set on the recorder (48 kHz and 24-bit are common for dialogue; many recorders now record 32-bit float), timecode frame rate, and the level of the reference tone at the head of the roll, such as -20 dBFS. The timecode frame rate should match the camera's, such as 23.976; note whether the recorder runs time-of-day or record-run timecode. Start a new report when the sound roll changes. If a roll runs past one page, continue on the next sheet with the same sound roll number.
Then the track key: what each recorder track carries, such as Track 1 boom, Track 2 lav on one actor, Track 3 lav on another. The CSV has lines for eight tracks; the PDF has room for four. If the recorder also writes a mix track, give it a line in the key.
Columns: one row per file
| Scene | The scene and setup from the slate, such as 12 or 12A. It should match the camera report and the board. |
|---|---|
| Take | The take number on the slate. Room tone and wild tracks get a label here instead, such as RT or WT1. |
| File | The file name the recorder wrote, such as 12_T03.WAV. Recorders name files differently; write the name exactly as it appears on the card, because that is what the assistant editor searches for. |
| Start TC | The recorder's timecode at the start of the file. Sound rolls before camera, so when both are jammed to the same time-of-day timecode, this is a few seconds earlier than the camera's timecode at the clap. Editorial lines up on that timecode, and the clap is the check. On record run the two numbers are not one clock, and the clap is the sync. |
| Tracks | Which tracks were recorded on this file, such as 1-3. Note a track that was dropped or muted for the take. |
| Sync or wild | Sync if the file was recorded with the camera rolling. Wild if not: room tone, wild lines, or a sound effect recorded on its own. |
| Circle | Mark the takes the director wants editorial to use, the same ones circled on the camera report. On the PDF, circle the take number. In the CSV, write Yes. |
| Notes | Anything editorial needs to know: false start, plane, a lav rubbing, an off-mic line, or "good for sound" on a take that was no good for camera. |
Add or delete columns to suit the shoot; the CSV is plain text.
Room tone and wild tracks
Room tone is 30 seconds to a minute of the set with everyone still and quiet, recorded with the mics where they were for the scene. The editor uses it to fill gaps in dialogue. Give it its own row (Wild, take RT) and write it again in the box at the foot of the PDF: where it was recorded, how long it ran, and which mics were open. A wild track, such as surf outside a window or a line read again off camera, also gets its own row marked Wild.
What a filled report looks like
The first five takes from the example file (sound roll 002; Track 1 boom, Track 2 lav on Nell, Track 3 lav on Theo). The circled takes are the same as on the camera report example:
| Scene | Take | File | Start TC | Circle | Notes |
|---|---|---|---|---|---|
| 12 | 1 | 12_T01.WAV | 09:29:57:14 | False start | |
| 12 | 2 | 12_T02.WAV | 09:33:11:20 | Good for sound | |
| 12 | 3 | 12_T03.WAV | 09:36:35:03 | Yes | |
| 12A | 1 | 12A_T01.WAV | 09:52:03:18 | Good for sound | |
| 12A | 2 | 12A_T02.WAV | 09:54:56:09 | Yes |
A take that has no sound (MOS) has no file, so it does not get a row here; the camera report and the slate show it. The example also has a room tone row for each mic setup: scene 12 had Theo's lav on, 12A did not. Scene 12B on the camera report example is not part of this sample.
Shot log from the slate
Take Slate is a digital clapperboard app for iPhone, iPad and Android. Each take you clap is a line in its shot log: scene, take, roll, flags (MOS, PU, SER, TAIL, 2ND STICKS, or STICKS x3 for a third clap), circle, note and the phone's clock (to the frame when the FPS field is set). With MOS on, tapping the sticks logs the take with no flash and no beep. The phone's clock is not the recorder's timecode, and the app does not read the recorder's file names, so start timecode, file and tracks stay on this sheet for the mixer to fill in. Share CSV sends the log through the phone's share sheet. The app and its CSV are free. Take Slate Pro is US$9.99 once and adds a PDF shot log and Wrap day.
Get it on the App StoreGet it on Google Play
More paperwork for the same shoot: the camera report template, and how to use a clapperboard with a printable cheat sheet.